AOC LM565 SERVICE MANUAL 15” LCD MONITOR LM565 THESE DOCUMENTS ARE FOR REPAIR SERVICE INFORMATION ONLY. EVERY REASONABLE EFFORT HAS BEEN MADE TO ENSURE THE ACCURACY OF THIS MANUAL; WE CANNOT GUARANTEE THE ACCURACY OF THIS INFORMATION AFTER THE DATE OF PUBLICATION AND DISCLAIMS RE LIABILITY FOR...
AOC LM565 Revision List Version Date Revision History TPV Model Name Jan-12-06 Initial Release T560KV4DB4AOA Add T560KH4DB4AOAPE Jul-18-2006 T560KH4DB4AOAPE in Item 12...
AOC LM565 2. LCD Monitor Description The LCD MONITOR will contain a main board, a power board, a keypad board and an audio board which house the flat panel control logic, brightness control logic and DDC. The power board will provide AC to DC Inverter voltage to drive the backlight of panel and the main board chips each voltage.
AOC LM565 3. Operating Instructions 3.1 General Instructions Press the power button to turn the monitor on or off. The other control buttons are located at front panel of the monitor. By changing these settings, the picture can be adjusted to your personal preferences.
AOC LM565 3.3 Adjusting The Picture The Description For Control Function: Main Main Menu Sub Menu Sub Menu Adjust Menu Description Reset Value Item Item Icon Range Icon Recall Cool Contrast Contrast from Digital-register. 0-100 Contrast Value Luminance Recall Cool...
Page 8
AOC LM565 Adjust the horizontal position of the H. Position 0-100 OSD. Adjust the vertical position of the OSD Setup V. Position 0-100 OSD. Adjust the OSD timeout. 10-120 Timeout Set OSD display language to English English. Set OSD display language to Deutsch German.
Page 16
AOC LM565 REMARK: 1) MCU initialize. 2) Is the EEprom blank? 3) Program the EEprom by default values. 4) Get the PWM value of brightness from EEprom. 5) Is the power key pressed? 6) Clear all global flags. 7) Are the AUTO and SELECT keys pressed? 8) Enter factory mode.
AOC LM565 5.3.2 Inverter/Power Board AC input Bridge Rectifier Transformer Rectifier CMOS EMI filter and Filter Start Circuit R906, R907 CN102 Feedback Over Voltage Circuit Protect Control IC ON/OFF OSC and MOSFET DC Convert Output Q203/Q204 Circuit Circuit Lamp Feedback...
AOC LM565 8. Maintainability 8.1 Equipments And Tools Requirement Voltmeter. Oscilloscope. Pattern Generator. DDC Tool with an IBM Compatible Computer. Alignment Tool. LCD Color Analyzer. Service Manual. User Manual.
AOC LM565 8.2 Trouble Shooting 8.2.1 Main Board No power No power Press power key and look if the picture is normal Please reinsert and make sure the AC of 100-240 is normal Reinsert or check the Adapter/Inverter section Measure U201 PIN2=2.5V U202 PIN2=3.3V...
Page 33
AOC LM565 No picture (LED orange) No picture The button if X601 oscillate Replace X601 under control waveform is normal Check reset circuit of Check Correspondent component U601 is normal Measure U201 PIN2=2.5V U202 PIN2=3.3V Replace U601 Replace U201, U202...
Page 34
AOC LM565 White screen White screen Measure Q204 base X601 oscillate waveform is normal is low level? Replace X601 Check Q204 is broken or Check reset circuit of CN503 solder? U601 is normal Check Correspondent Check Correspondent component. component. Replace PANEL...
AOC LM565 8.2.2 Power/Inverter Board 1) No power Check CN102 pin12 = 12V Check AC line volt 110V or 220V Check AC input Check the voltage of C905 (+) Check bridge rectified circuit and F901 circuit Check start voltage for the pin3 of IC901...
Page 36
AOC LM565 2.) W / LED, No Backlight Check C201 (+) =12V Check adapter Check ON/OFF signal Check Interface board or main board Check U201 pin9=12V Change Q201 or Q202 Check U201 PIN10, 7 have the output of sawtooth wave at short time Change U201 Check D201 (-) has the output of square wave at short time.
AOC LM565 8.2.3 Keypad Board OSD is unstable or not working Is Key Pad Board connecting normally? Connect Key Pad Board Replace Button Switch Is Button Switch normally? Replace Key Pad Board Is Key Pad Board normally? Check Main Board...
6500 color temp. parameter is x = 313±20, y = 329 ±20, Y =180 cd/m 3. Into factory mode of AOC LM565 Turn on power, press the MENU button, pull out the power cord, and then plug the power cord. Then the factory OSD will be at the left top of the panel.
AOC LM565 12. Different Parts List Diversity of T560KH4DB4AOAPE compared with T560KV4DB4AOA Location Part No. for TPV Description AUPC780A9P AUDIO BOARD CBPC560KH4DBP CONVERSION BOARD KEPC560KH9BP KEY BOARD PWPC5215A1E26C POWER BOARD S95G801820516 LVDS ASS'Y 15G6203 C 1 PANEL-BKT 15G6203 C 2...