Conversion Instructions - Saturn SMDR-36-6 Operation Manual

CONVERSION INSTRUCTIONS

TO BE COMPLETED BY AN AUTHORISED PERSON
ENSURE GAS IS ISOLATED WHILE PERFORMING
CONVERSION WORK. PERFORM A LEAK TEST BEFORE
IGNITING AND CALIBRATING BURNER AND PILOT
ADJUSTMENTS.
TO PROPANE GAS
Regulator
Open Burner/Grill Burner Access and change the injectors to PROPANE Gas
Oven Burner
LEAK TEST IN ACCORDANCE WITH APPROVED METHODS
Ignite burners and adjust.
AMEND DATA PLATE AND APPLY 'PROPANE' GAS LABEL
TO NATURAL GAS (NG)
Regulator
Open Burner/Grill Burner Access and change the injectors to a NG Injectors
Oven Burner
Gas Range Manual
Change regulator to PROPANE gas configuration
and adjust as necessary
injectors (refer Nominal Gas Consumption
Table)
Access and change the injector to a PROPANE
Gas Injector (refer Nominal Gas Consumption
Table)
Change regulator to NG gas configuration and
adjust as necessary
(refer Nominal Gas Consumption Table)
Access and change the injector to a NG Injector
(refer Nominal Gas Consumption Table)
Page 21 Revision: 24 Feb 2011