Trivets - Saturn SMDR-36-6 Operation Manual

If any ports remain clogged, remove the burner cap and complete burner and
clean thoroughly with a suitable detergent and hot water. Dry thoroughly,
ensure the air shutter is fully open, reinstall (ensure the injector is located in
the burner venturi), ignite and check the flame pattern.
Note: The burner flame should be uniformly blue. If yellow flames are present,
this may indicate that grease and dirt are present in the burner throat. Remove
and clean the burner per the above.

TRIVETS

The trivets should be removed from the appliance before cleaning.
To clean the trivets, wash with warm water and a suitable detergent using a
soft cloth and then dry.
For heavily soiled trivets, use a suitable oven cleaner and non-abrasive pad or
brush.
Gas Range Manual Page 17 Revision: 24 Feb 2011