Sata Interface (Intel Chipset Limitation); Sata / Esata Signal Quality [New]; Graphics Driver: Support For Collage Mode - Fujitsu D3231-S Technotes

Known Issues & Important Notes
9.4

SATA Interface (Intel chipset limitation)

D323x and D3243-S may show compatibility issues with SATA-II harddisk drives. Intel strongly recommends to use SATA-III HDDs only.
D323x and D3243-S may show compatibility issues with SATA optical drives (older models). Please make sure to use latest revision of
optical drives and related firmware only.
9.5

SATA / eSATA Signal Quality [New]

Please note:
In BIOS Setup, if "eSATA" mode is enabled for any SATA port, the speed for this port is reduced to SATA Gen2.
The driver strength is NOT influenced by this setting.
9.6

Graphics driver: Support for Collage Mode

In order to use the new Collage Mode (combine several displays to one display) graphics driver "3355" or higher is required
FTP download:
ftp://ftp.ts.fujitsu.com/pub/Mainboard-OEM-Sales/Products/Mainboards/Industrial&ExtendedLifetime/D323x-S/Drivers_D323x-S/
9.7
mSATA support
D3231-S and D3236-S provide an mSATA socket. Please note that one SATA channel (Port 2) and mSATA are shared and cannot be used
simultaneously. By default, Port2 is enabled and mSATA disabled. Please select the required option in BIOS Setup accordingly.
a
g
e
TechNotes D323x-S_D3243-S V1.2
mainboards
Page 84 of 98 http://www.fujitsu.com/fts/products/computing/pc/accessories/mainboards