Kenwood KDC-X399 Instruction Manual page 18

BLUETOOTH®
NUMBER DIAL 1 Turn the volume knob to select a number (0 to
9) or character (
2 Press S / T to move the entry position.
Repeat steps
the phone number.
3 Press the volume knob to call.
(or using RC-406)
1 Press the number buttons (0 to 9) to enter the
phone number.
2 Press
VOICE Speak the name of the contact you want to call or
the voice command to control the phone functions.
( Make a call using voice recognition)
BATT *
LOW/ MID/ FULL: Shows the strength of the
battery.
SIGNAL *
NO SIGNAL/ LOW/ MID/ MAX: Shows the strength
of the current received signal.
* Functionality depends on the type of the phone used.
Make a call using voice recognition
1
Press and hold to activate the connected
phone.
2 Speak the name of the contact you want to call
or the voice command to control the phone
functions.
• Supported Voice Recognition features vary for
each phone. Refer to the instruction manual of the
connected phone for details.
• This unit also supports the intelligent personal
assistant function of iPhone.
16
JS_KWD_KDC_X399_KN_EN_05=F.indd 16
, #, +).
*
1 2
and until you finish entering
to call.
Delete a contact
1 Press to enter Bluetooth mode.
2
Turn the volume knob to select [CALL HISTORY], then press the knob.
3
Turn the volume knob to select a contact.
4 Press and hold the volume knob to enter delete mode.
5
Turn the volume knob to select [DELETE ONE] or [DELETE ALL], then press the knob.
DELETE ONE: Selected name or phone number in step
DELETE ALL: All names or phone numbers in [CALL HISTORY] in step
6
Turn the volume knob to select [YES], then press the knob.
7
Press and hold to exit.
• To return to the previous setting item, press
• Not applicable for mobile phone that supports PBAP.
Settings in memory
Store a contact in memory
You can store up to 6 contacts into the number buttons (1 to 6).
1
Press to enter Bluetooth mode.
2 Turn the volume knob to select [CALL HISTORY], [PHONE BOOK], or [NUMBER DIAL], then
press the knob.
3
Turn the volume knob to select a contact or enter a phone number.
If a contact is selected, press the volume knob to show the phone number.
Press and hold one of the number buttons (1 to 6).
4
"STORED" appears when the contact is stored.
To erase a contact from the preset memory, select [NUMBER DIAL] in step
number.
Make a call from memory
1 Press to enter Bluetooth mode.
Press one of the number buttons (1 to 6).
2
3
Press the volume knob to call.
"NO MEMORY" appears if there is no contacts stored.
3
is deleted.
2 is deleted.
.
2 and store a blank
19/8/2014 9:28:33 AM