Step 1 Assembling The Front And Surround Speakers - Panasonic SC-PT875 Operating Instructions Manual

step 1 Assembling the front and surround speakers
Preparation
≥ To prevent damage or scratches, lay down a soft cloth to assemble speakers.
≥ For assembly, use a Phillips-head screwdriver (not included).
Make sure you have all the indicated components before starting assembly, setup, and connection.
≥ Keep the screws out of reach of children to prevent swallowing.
≥ For optional wall mount, refer to page 26.
2 Front speakers
2 Surround speakers
1
2
Leave about 120 mm.
Speaker assembly option
Thread the speaker cable through
the base.
Leave about
120 mm.
You can remove and use the
cable from the stand. To reattach
the cable, refer page 26.
Preventing the speakers from falling
≥ You will need to obtain the appropriate screw eyes to match the walls
or pillars to which they are going to be fastened.
≥ Consult a qualified housing contractor concerning the appropriate
procedure when attaching to a concrete wall or a surface that may not
have strong enough support. Improper attachment may result in
damage to the wall or speakers.
String (not included)
Thread from the wall to the speaker and tie tightly.
Screw eye
(not included)
Rear of the
speaker
4 Stands (with cable)
Position the cable
between the ridges.
Attach the speaker.
Approx.
150 mm
Wall
4 Bases
Slide into the groove.
Tighten securely.
Insert the wire fully.
i: White
j: Blue
Push!
Press into the groove.
Tighten securely.
Insert the wire fully.
i: White
Push!
j: Blue
Press into the groove.
Tighten securely.
Slide into
the groove.
Caution
Do not stand on the base. Be cautious when children are near.
DO
NOT
16 Screws
2
1
5