AT&T E5802B User Manual page 41

5.8 ghz cordless telephone with caller id/call waiting
Hide thumbs Also See for E5802B:
Table of Contents

Advertisement

Troubleshooting
There is noise or
interference dur-
ing a telephone
conversation
My calls fade out
or cut in and out
when I am using
t h e
c o rd l e s s
handset
sion, radio, or other appliances may cause the telephone
to not dial out properly. If you cannot eliminate the
background noise, first try muting the cordless hand-
set before dialing, or dialing from another room in your
home with less background noise.
telephone base.
the same circuit as the telephone base can cause inter-
ference. Try moving the appliance or telephone base to
another outlet.
cordless telephone. Try installing your telephone as far
away as possible from the following electronic devices:
wireless routers, radios, radio towers, pager towers, cel-
lular telephones, digital telephones, intercoms, room
appliances, and other cordless telephones.
this telephone in the same outlet or near a microwave oven.
protector, plug the telephone (or modem/surge protec-
tor) into a different location. If this solves the problem,
re-locate your telephone or modem farther apart from
each other, or use a different surge protector.
operating range. Try moving the base to another loca-
tion, preferably a higher location for better reception.
and plug in a corded telephone. If calls are still not clear,
the problem is probably in the wiring or local service.
38
-

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

E1802bE5833bE1833b

Table of Contents