Turn Signal Light; Stop Light/Tail Light; Ignition Switch - KYMCO VENOX 250 Service Manual

18
. LIGHTS/INSTRUMENT/SWITCHES/HORN

TURN SIGNAL LIGHT

Remove the turn signal light shell and the
bulb.
Check the bulb for damage and replace with
a new one if necessary.
The installation sequence is the reverse of
removal.

STOP LIGHT/TAIL LIGHT

Remove the two taillight shell screws and
the shell.
Remove the bulb and check the bulb for
damage. Replace with a new one if
necessary.
Bulb Specification: 12V 21/5W

IGNITION SWITCH

REMOVAL
Disconnect the ignition switch wire
coupler.
Remove the two bolts attaching the ignition
switch.
Remove the ignition switch.
18-3
Bulb
Bulb
Bolt
Ignition Switch
Reflector