Adjusting Dsp Effect - JVC TH-A9 Instructions Manual

Sound settings Sound settings Sound settings Sound settings

Adjusting DSP effect

You can adjust the strength of DSP (Digital Signal Processor) ef-
fect for each DAP mode so that you can customize sound effect.
About the DAP, see "Using the DSP Modes [DSP MODE]" on
page 20.
1
Press DSP MODE to select one of DSP
modes.
The current DSP mode appears on the display window. Each
time you press the button, DSP mode changes as follows.
= SURROUND ON*= =
= =
DANCE CLUB =
(back to the beginning)
* "PRO LOGIC" appears when the current source is
not DVD.
2
Press SOUND.
The system enters sound setting mode.
3
Press EFFECT to select the desired effect
level.
The current effect level appears on the display window. Each
time you press the button, the effect level changes as follows.
j DSP EFFECT 1 j j
j j
FECT 3 j j DSP EFFECT 4 j j j
• The greater number, the greater effect.
4
Repeat steps 1-3 for other DSP mode.
• After 5 seconds, the display returns to the one before enter-
ing the sound setting mode.
Note:
• If DAP mode is not selected, you cannot adjust the DSP
effect.
Downloaded From TheatreSystem-Manual.com Manuals
52 52 52 52
STANDBY/ON
TV/CATV/DBS AUDIO
VCR
AUX FM/AM DVD
TITLE SUBTITLE DECODE AUDIO
ZOOM DIGEST TIME DISPLAY
2
RETURN ANGLE CHOICE SOUND
SUBWOOFER EFFECT
CONTROL
3
VCR
CENTER TEST
TV
REAR-L
SLEEP
REAR-R
SETTING
TV RETURN FM MODE 100+
AUDIO/
TV/VCR
PLAY
MODE
CATV/DBS
ENTER
1
THEATER DSP
POSITION MODE
= THEATER = = LIVE CLUB =
= = = =
= = = HALL = = = = PAVILION = = DSP OFF = = =
j DSP EFFECT 2 j j DSP EF-
j j j j
j DSP EFFECT 5 j j j
=
= =
= = =
j j j