Adjusting Dsp Effect - JVC TH-A9 Instructions Manual

Sound settings Sound settings Sound settings Sound settings

Adjusting DSP effect

You can adjust the strength of DSP (Digital Signal Processor)
effect for each DAP mode so that you can customize sound effect.
About the DAP, See "Using the DSP Modes [DSP MODE]" on
page 20.
AUX FM/AM
TITLE SUBTITLE
ZOOM DIGEST
RETURN ANGLE
SUBWOOFER
CONTROL
VCR
CENTER
TV
REAR-L
SLEEP
REAR-R
SETTING
TV RETURN FM MODE
EON SELECT
PLAY
MODE
ENTER
PTY-
EON
THEATER
POSITION
RDS DISPLAY
PTY SEARCH
1
Press DSP MODE to select one of DSP
modes.
The current DSP mode appears on the display window. Each
time you press the button, DSP mode changes as follows.
= SURROUND ON*= = = THEATER =
= = = =
DANCE CLUB = = = = HALL =
(back to the beginning)
* "PRO LOGIC" appears when the current source is
not DVD.
2
Press SOUND.
The system enters sound setting mode.
3
Press EFFECT to select the desired effect
level.
The current effect level appears on the display window. Each
time you press the button, the effect level changes as follows.
j DSP EFFECT 1 j j j DSP EFFECT 2 j
j j j j
EFFECT 3 j j j j DSP EFFECT 4 j
• The greater number, the greater effect.
4
Repeat steps 1-3 for other DSP mode.
• After 5 seconds, the display returns to the one before
entering the sound setting mode.
Note:
• If DAP mode is not selected, you cannot adjust the DSP
effect.
54 54 54 54
STANDBY/ON
TV AUDIO
VCR
DVD
DECODE AUDIO
TIME DISPLAY
2
CHOICE SOUND
EFFECT
3
TEST
100+
DVD
RDS
+PTY
1
DSP
MODE
= LIVE CLUB = =
= = = =
= = = PAVILION = = = = DSP OFF = = = =
j DSP
j j
j j DSP EFFECT 5 j j j j j