Troubleshooting
Troubleshooting
Camera problems
Status
Camera does not
turn on
Camera does not turn
off
Camera buttons and
controls do not
function
LCD is too dark.
Pictures remaining
number does not
decrease after taking a
picture
Flash does not fire
Memory card is almost
or entirely full
Memory card not
recognized or camera
freezes with card
Battery life is short
36
Solution
■
Make sure the battery is charged and installed correctly
page
1).
■
Adjust the LCD Brightness setting
■
Continue taking pictures. The camera is operating normally.
(The camera estimates the number of pictures remaining after each
picture is taken, based on picture size and content.)
■
Check the flash setting, and change as needed
NOTE: The flash does not fire in all modes.
■
Transfer the pictures to the computer
■
Delete pictures from the card
■
Card may be corrupted. Format the card in the camera
page
31).
■
Use another memory card. Only SD or SDHC Cards are supported.
■
Verify that the correct battery type is installed
■
Wipe the battery contacts with a clean, dry cloth before inserting
it in the camera.
■
Insert a new/charged battery
■
Limit the time you review pictures/videos on the camera LCD.
■
Purchase batteries at www.kodak.com/go/accessories.
(see page
30).
(see page
(see page
32).
(see page
18) or insert a new card.
(see page
(see page
1).
www.kodak.com/go/support
(see
8).
(see
44).