Troubleshooting
Picture quality problems
Status
Picture is not clear
Picture is too dark
Picture is too light
38
Solution
■
Clean the lens
(see page
■
Place the camera on a flat, steady surface or use a tripod (especially
in high-zoom settings or in low light).
■
Use a larger picture size
■
If you're manually adjusting the ISO speed, realize that high ISO
setting may cause grainy pictures
■
Reposition the camera for more available light.
■
Use Fill flash
(see page
or change your position so light is not behind the subject.
■
Move so that the distance between you and the subject is within the
effective flash range. (See
■
In Program mode, increase the Exposure Compensation
page
28).
■
Reposition the camera to reduce the amount of available light.
■
Turn off the flash
■
Move so that the distance between you and the subject is within the
effective flash range (see
■
In Program mode, decrease the Exposure Compensation
page
28).
42).
(see page
27).
(see page
8) in Program mode, Backlight in SCN mode,
Specifications, page
(see page
8).
Specifications, page
www.kodak.com/go/support
28).
40.)
(see
40).
(see