Networking Your Printer
Printing the network configuration
Installing your printer on additional computers on the network
Connecting to another KODAK All-in-One Printer
10
To print the current network configuration:
1. Load plain paper into the printer. (See
2. Press Home.
3. Press
to select Network Settings, then press OK.
4. Press
to select Print Network Configuration, then press OK.
To add your printer to another computer(s) on your network, install the KODAK
All-in-One Printer Software on each computer. Go to
www.kodak.com/go/esp5250downloads
www.kodak.com/go/esp5210downloads, and follow the on-screen instructions.
If you are connecting to a newer model printer (for example, you have an ESP 7
printer and now you are adding an ESP 5250 printer), you must install the software
for the newer model.
If you are connecting to another ESP 5250 printer or to a previous model:
On a computer with WINDOWS OS:
1. Select Start > All Programs > Kodak > Kodak Printer Network Setup Utility.
• If your wireless all-in-one printer (example: KodakESP5200+1133) is not
listed:
a. Select No, my printer is not listed, then click Next.
b. From the drop-down list, select your printer.
c. Select Network - Wireless/WiFi, then click Next.
When your printer is detected, driver installation begins.
• If your wireless all-in-one printer (example: KodakESP5200+1133) is listed:
a. Highlight the all-in-one printer that is connected to your network.
b. Select Yes, my printer is listed, then click Next.
When your printer is detected, driver installation begins.
2. When driver installation is complete, click Done.
On a computer with MAC OS:
1. Select Apple > System Preferences.
2. Under Hardware, select Print & Fax.
3. In the Print & Fax dialog box, click +.
4. Select your printer from the list, then click Add.
www.kodak.com/go/aiosupport
Loading plain paper, page
or
14.)