Troubleshooting
Get help with problems you cannot resolve.
Status lights
Power status light
Wi-Fi status light
52
The status lights indicate the condition of the printer. There are two status lights on
the printer, one that indicates power, the other indicates Wi-Fi status.
Power light
Off
Blinking
On
Power light
Off
Blinks continuously
www.kodak.com/go/aiosupport
Contact Kodak at
www.kodak.com/go/contact
following information available:
– Kodak Service Number (located inside the printer when
you open the printer access door)
– Printer model number (located on the control panel)
– Computer model, operating system, and version of
Home Center Software
– Exact wording of any error message(s) and the error
code
What it means
• The printer is turned off.
– Press the on/off button to turn on power.
• The printer does not have power.
– Make sure that the power cord is plugged into the back
of the printer and into an electrical outlet, and that the
electrical outlet has power.
• The printer is busy.
– Wait for the printer to finish the task.
• The printer is ready
What it means
The Wi-Fi radio is either turned off, or is turned on but not
connected to a wireless network.
The Wi-Fi radio is turned on and the printer is searching for
available wireless networks within range.
and have the