Samsung HT-Z510 User Manual page 69

XM Display Modes
The XM features described here only operate when the optional XM receiver and antenna are connected to
the main unit.
Press the XM DISPLAY button.
~ Each time the XM DISPLAY button is pressed, the mode
changes as follows:
CHANNEL NAME/NUMBEr ➞ CHANNEL CATEgOrY ➞
ArTIST NAME/SONg TITLE ➞ SIgNAL STrENgTH
When the Channel Name/Number is displayed :
~
When the Channel Category is displayed :
~
When the Artist Name/Song Title is displayed :
~
When the Signal Strength is displayed :
~
M
Checking the XM Signal Strength
Press the XM DISPLAY button until <Signal> is displayed.
The display changes as shown below according to the receiving
~
condition.
Checking the radio ID
Press the Cursor , button (or [,] button on the main unit)
to select channel <o>.
The Radio ID is displayed.
~
M
Downloaded From TheatreSystem-Manual.com Manuals
`
The front panel display can indicate up to 10 alphanumeric characters at once. If the
information contains more than 10 characters, the information scrolls from right to left.
`
If the information contains a character that cannot be recognized by the unit, the character
will be displayed with an underbar " * ".
Display
GOOD
MARGINAL Signal strength is marginal
WEAK Signal strength is poor
NO
`
To sign up for an account with the XM Satellite Radio service, an XM Satellite Radio ID
number is required. Follow the procedure above to check your ID number, and then
access the website at "http://activate.xmradio.com" or call "1-800-XM-RADIO(1-800-967-
2346)" with a major credit card to sign up.
Condition
Signal strength is good
Loss of signal