radio
LISTENING TO RADIO
Remote Control
1.
Press the TUNER button to select the FM band.
2.
Tune in to the desired station.
Main Unit
1.
Press the FUNCTION button to select the FM band.
2.
Select a broadcast station.
Press the MO/ST button to listen in Mono/Stereo.
• Each time the button is pressed, the sound switches between STEREO and MONO.
• In a poor reception area, select MONO for a clear, interference-free broadcast.
PRESETTING STATIONS
Example : Presetting FM 89.10 in the memory
1.
Press the TUNER button to select the FM band.
Press the , , . button to select 89.10.
2.
3.
Press the TUNER MEMORY button.
4.
Press the #,$ button to select preset number.
5. Press the TUNER MEMORY button again.
6. To preset another station, repeat steps 2 to 5.
•
Downloaded From TheatreSystem-Manual.com Manuals
Automatic Tuning 1 : When the #,$ button is
•
pressed, a preset broadcast station is selected.
•
Automatic Tuning 2 : Press and hold the , , .
button to automatically search for active
broadcasting stations.
Manual Tuning : Briefl y press the , , . button to
•
increase or decrease the frequency incrementally.
Automatic Tuning 1 : Press the STOP
•
button to select the preset station.
•
Automatic Tuning 2 : Press the STOP
the #,$ button to automatically search the band.
Manual Tuning : Press the STOP
•
the
button to tune in to a lower or higher frequency.
You can select between 1 and 15 presets.
•
To tune in to a preset station, press the #,$
button on the remote control to select a channel.
(¦)
button to select PRESET and then press the #,$
(¦)
button to select MANUAL and then press and hold
(¦)
button to select MANUAL and then briefl y press
65