Samsung HT-Z510 User Manual page 23

Speaker Components
L (aH81-04171e)
R (aH81-03848H)
How to Install the Speaker on the Stand (HT-TZ512 only)
1. Turn the STAND upside-down and connect
it to the STAND BASE.
. Insert three small SCrEWS into three holes
marked with arrows using a screwdriver as
shown in the illustration.
3. Insert a large SCrEW into the hole on the
rear of the Speaker STAND.
. Connect the assembled stand to the
SPEAKEr.
5. Insert another large SCrEW into the hole
on the rear of the speaker using a
screwdriver as shown in the illustration.
. This is the successfully assembled speaker.
Make sure that the speaker is installed on a
fl at and stable area. Otherwise it may be
easily knocked over.
How to Install the Speaker on the Stand Base (HT-TZ512 only)
1. Connect the SPEAKEr with the
STAND BASE.
. Insert the SCrEW into the hole on the rear
of the speaker using a screwdriver as shown
in the illustration.
3. This is the SPEAKEr successfully
assembled with the Stand Base.
Downloaded From TheatreSystem-Manual.com Manuals
HT-TZ512
(L) (r)
rear
(L) (r)
L (aH81-04171G)
R (aH81-03848J)
Front
StanD
(aH81-03846n)
CENTER CENTER
(aH81-03853a) (aH81-03469a)
FRONT/REAR FRONT/REAR
(aH81-03852a) (aH81-03465a)
HoLe CoVer CRADLE STAND/
WALL MOUNT
1
3
5
1
3
SCREW (Small): 6EA
Center
(aH81-03944a)
(aH81-04171F)
SCREW (Large): 4EA
(aH81-03943a)
SubWooFer StanD baSe
(aH81-04171D) (aH81-03846p)

STAND
BASE
STAND



SPEAKER
STAND
BASE
SPEAKER
STAND
1