Using Your Modem; Led Indicator; Removing The Modem Safely; Uninstalling The Software - Zte MF636 User Manual

Usb modem

Hide thumbs Also See for MF636:

Table of Contents

2.3 Using your Modem

Connect your modem to the PC. Your computer will launch the Connection Manager

application automatically. The modem will initialize and the main user interface will appear.

When the Standby icon appears in the System Tray, the modem is ready to work normally.

If your PC does not launch the software automatically click Start > Programs > Rogers

Connection Manager > Rogers Connection Manager to run the application software, or

double click the shortcut icon on the desktop.

Note: The modem can take up to 30 seconds to launch the user interface. If you click the

icon during the auto-run sequence you may see an error message on your PC. Please

ignore the message and close the window.

LED Indicator

Yellow

Green Solid

Green blinking

Blue solid

Blue blinking

Red solid

Red blinking

Please close the application software first and then pull out the modem or USB cable.

If you need to uninstall the software, close the application first and then click Start >

Programs > Rogers Connection Manager > Uninstall and follow the prompts to uninstall.

USB Modem Working Status

Power on. Not registered on the 2G or 3G network

Registered on the 2G network.

Active data transfer on the 2G network

Registered on the 3G network.

Active data transfer on the 3G network.

Roaming status

Active data transfer in roaming status

Table of Contents