Software Installation - Zte MF636 User Manual

2.1 Unpacking
Check the following articles are in the package: Modem, USB Extension cable, Quick Start
Guide and User Manual.

2.2 Software Installation

2.2.1 Insert the SIM Card into the Modem
The SIM card is the Subscriber Interface Module provided by your Service Provider. Before
using the modem make sure the SIM card supports data services. Insert the SIM card as
shown with the gold contacts facing down and the beveled edge on the left hand side. Push
the SIM card in as far as it will go.
2.2.2 Connecting the Modem and PC
Connect the modem to your PC's USB port directly. You may alternatively use the supplied
USB cable. In most cases the single cable should suffice. However, to increase the power
delivered to the modem, use the double USB cable if required.
2.2.3 First Time Software Installation
After the modem is connected, your PC will launch the installation application software
automatically.
1. Select your language and press Next.
2. Click Next to continue.
3. Read the license agreement, select I accept the terms of the license agreement
and press Next.
4. Click Next to accept the default installation location or press Change to specify your
own path.
5. The wizard will take a few minutes to install software. Click Finish to complete.
Notes
• If your security settings prevent Autorun then you will have to start the process
manually. Navigate to the CDROM and double click the Autorun.exe file to start the
software installation
• The application software only needs to be installed the first time the modem is
connected to your PC. After the software is installed you will operate the modem as
described in section 2.3.
2 Installation