Controlling The Digital Receiver - Topfield TF 4000 Fi User Manual

2
Introduction
vices, a selection of television and radio services have already
been programmed for you. So all broadcasting services that
have gone on air are available to you. You can find the latest
transponder information from various broadcasters on tele-
text.
The TF 4000 Fi digital receiver has features as follows:
•
•
•
•
•
•

1.2 Controlling the digital receiver

You can control the digital receiver with the remote control
and the front panel buttons.
NOTE
The digital receiver supports DiSEqC 1.0, DiSEqC 1.1,
DiSEqC 1.2 and USALS.
The digtial receiver is able to memorize up to 5,000 tele-
vision and radio services.
Electronic Program Guide (EPG) provides an overview
of program schedules for next few hours.
You can edit the service list and make your own favorite
service list.
You can view the information of a current television or
radio program.
You can update the firmware of the digital receiver to
the latest, which will be provided by Topfield.
When the digital receiver is off but plugged to a wall
outlet, we say that it is in standby mode; on the other
hand, when it is on, it is in operation mode. You should
keep the digital receiver plugged to a wall outlet so as
it can run timer events.