Topfield TF 4000 Fi User Manual page 30

26
Service Search
1.
2.
To search every service of a transponder, perform the follow-
ing steps:
1.
2.
3.
4.
5.
To search one service of a transponder, perform the following
steps:
1.
2.
3.
4.
5.
6.
To search every service of a SMATV transponder, if the digi-
tal receiver is connected to a SMATV, perform the following
Choose your desired satellite at the Satellite Name pa-
rameter.
Set the Search Mode option to Auto.
Choose your desired satellite at the Satellite Name pa-
rameter.
Set the Search Mode option to Manual.
Choose your desired transponder at the Frequency pa-
rameter or input it with the numeral buttons.
Input the symbol rate of your desired transponder to the
Symbol Rate parameter with the numeral buttons.
Set the Polarization parameter to the polarization of your
desired transponder.
Choose your desired satellite at the Satellite Name pa-
rameter.
Set the Search Mode option to Advanced.
Choose your desired transponder at the Frequency pa-
rameter or input it with the numeral buttons.
Input the symbol rate of your desired transponder to the
Symbol Rate parameter with the numeral buttons.
Set the Polarization parameter to the polarization of your
desired transponder.
Specify the PIDs of your desired service at the PID menu
with the numeral buttons. PID (Packet Identifier) is a set
of numbers that identifies transport stream packets.