Sound Mode; Rf Output - Topfield TF 4000 Fi User Manual

14
Preference Settings
displayed in the wide screen.
If you have a normal-screen television, set the TV Aspect Ratio
option to 4:3.
You cannot enjoy well wide-screen programs with your normal-
screen television as the above figures show. The left figure
shows a normal picture displayed in the normal screen. To
watch wide-screen programs in the shape like the center fig-
ure, set the 16:9 Display Format option to Letter Box; then,
wide-screen pictures will be reduced to fit to the width of the
normal screen. Otherwise to watch them in the shape like the
right figure, set the option to Center extract; then, wide-screen
pictures will be cut out on the left and right sides equally to fit
to the width of the normal screen.

3.2.3 Sound mode

Basically, there are two audio sources as you can find two au-
dio sockets on the back panel of the digital receiver. You can
enjoy only one source or both of them in either stereo or mono.
Set the Sound Mode option as you desire.
Apart from this setting, you can change the sound mode with
button when you watch a program. For detailed descrip-
tions about how to change the sound mode, refer to § 5.4.

3.2.4 RF output

If you have connected your television to the RF OUT socket,
you should configure the RF output. The digiral receiver can
make an analog television from a digital television and output