Table of Contents
Advertisement
22
Service Search
frequency. The diffrence between a broadcasting frequency
and its LNB frequency must be within 950 to 2,150 MHz. For
example, if the frequency band of your desired satellite ranges
from 3,660 to 4,118 MHz, you have to set the LNB Frequency
parameter to 5150 MHz.
The LNB has to be supplied with power to operate. Set the
LNB Power option to On if it does not have any other power
supply.
You had better ignore the 22 kHz option.
The digital receiver is designed to be compatible with DiSEqC
(Digital Satellite Equipment Control) switches. It is possible
to connect several antennas to one digital receiver by DiSEqC
switches. A DiSEqC 1.0 switch allows switching between up
to 4 satellite sources and a DiSEqc 1.1 switch allows switching
between up to 16 satellite sources.
Set the DiSEqC 1.0 and DiSEqC 1.1 parameters according to
your antenna configuration.
4.1.2 Configuring DiSEqC 1.2 settings
Your motorized anntenna will turn toward your desired satel-
lites panning horizontally along the equator by your DiSEqC
1.2 commands.
For example, to select the antenna con-
nected to the A5 input in the left figure,
set the DiSEqC 1.1 parameter to 2 of
4 and the DiSEqC 1.0 parameter to 1
of 4. If you have a mini DiSEqC 1.0
switch which has only two inputs, you
should set the DiSEqC 1.0 parameter
to Mini A instead of 1 of 4.
Advertisement
Table of Contents
