Table of Contents
Advertisement
F I X T U R E O V E R V I E W
1. Fuse Holder Assembly– Houses 250v T3.15A GMA safety fuse. Always replace with
an exact match unless otherwise specified by an authorized Elation Service Technician.
2. Power Switch – Used to power fixture ON or OFF.
3. Power IN – Power connection (powerCON) to power source.
4. 5-Pin DMX OUT – Sends incoming DMX signal to the next fixture in the DMX chain via a
female 5-pin XLR jack.
5. 5-Pin DMX IN – Accepts incoming DMX signal via a male 5-pin XLR jack
6. Menu Control Buttons – Control buttons MENU, UP, DOWN, and ENTER.
7. LED Indicators – LED indicators for DMX, MASTER, SLAVE, and SOUND.
8. LED Control Display – LED control display showing various menus and functions.
9. Safety Hook – Used to connect safety cable to.
10. Ethernet (RJ45) Connectors (x2) – Used to transfer fixture's information to a main
controller. (CURRENTLY, THESE HAVE NO FUNCTION)
9
w w w . e l a t i o n l i g h t i n g . c o m
1: Fuse Holder Assembly
2: Power Switch
3: Power IN (powerCON)
4: 5-Pin DMX OUT
5: 5-Pin DMX IN
6: Menu Control Buttons
7: LED Indicators
8: LED Control Display
9: Safety Hook
10: Ethernet (RJ45) Connectors (x2)
TVL
F 1CW
U ser
M anual
1 .2
™
Advertisement
Table of Contents
