Safety Instructions - Elation TVL F1WW User Manual

S A F E T Y I N S T R U C T I O N S
For proper operation, follow the Installation guidelines described in this manual. Only qualified and
•
certified personnel should perform the installation and only the original rigging parts (brackets, holders,
clamps, safety cables) included with this fixture should be used for installation. Any modifications will void
the original manufactures warranty and increase the risk of damage and/or personal injury.
Never look directly into the light source to prevent risk of injury to your retina, which may induce blindness.
•
Those suffering from EPILEPSY should avoid looking directly into the light source of this unit at all times.
The fan and air inlets must remain clean and never blocked. Allow approx. 6" (15cm) between this fixture
•
and other devices or a wall for proper cooling.
Always disconnect from main power source before performing any type of service and/or cleaning
•
procedure. Only handle the power cord by the plug end, never pull by tugging the wire portion of the cord.
Do NOT operate fixture if the power cord has become frayed, crimped and/or damaged. If the power cord
•
is damaged, replace it immediately with a new one of similar power rating.
Do NOT operate fixture near any flammable materials.
•
Do NOT operate fixture in dusty environments.
•
7
™
The TVL F1WW is an extremely sophisticated piece of electronic equipment. To
guarantee a smooth operation, it is important to follow the guidelines in this
manual. The manufacturer of this device will not accept responsibility for damages
resulting from the misuse of this fixture due to the disregard of the information
printed in this manual.
This device falls under PROTECTION CLASS 1. It's essential this device is
grounded properly, and only qualified personnel perform all electrical connections.
w w w . e l a t i o n l i g h t i n g . c o m
TVL F 1CW
U ser M anual 1 .2
™