Fujitsu PRIMERGY TX300 S5 Service Supplement Manual page 42

Replacing the 2.5-inch HDD backplane
2
Figure 33: Mounting the 2.5-inch hard disk drive
Ê At a slight angle insert the new 2.5-inch HDD backplane into the drive cage
(1) so that the guide bars (see circles) run into the recesses on the
backplane.
Ê Fold down the 2.5-inch HDD backplane in the direction of the arrow (2).
Ê Center the 2.5-inch HDD backplane at all six mounting holes.
Ê Secure the 2.5-inch HDD backplane with six screws (M3 x 4,5 mm).
V
Caution!
Ensure not to use longer screws as they may extend into the drive
cage and damage hard disk drives!
42 Service Supplement
Replacement routines
1
PRIMERGY TX300 S5