Fujitsu PRIMERGY TX300 S5 Service Supplement Manual page 16

Safety notes
The equipment and tools you use must be free of static charges.
Only touch the components at the positions highlighted in green (touch
points).
Do not touch any exposed pins or conductors on a component.
Use a grounding cable designed for this purpose to connect yourself to the
system unit as you install components.
Place all components on a static-safe base.
I
You will find a detailed description for handling ESD components in the
relevant European or international standards (DIN EN 61340-5-1,
ANSI/ESD S20.20).
16 Service Supplement
PRIMERGY TX300 S5