Superior Fireplaces VRL4543ZMN Installation And Operation Instructions Manual page 22

Figure 34 - Remote Control
FLAME HEIGHT
This function allows you to control the height
of the flames through 6 levels. Select manual
flame height function by pressing MODE but-
ton until a flame is shown in lower left corner
of display. Use the UP/DOWN arrow button
to set desired flame height. A beep from the
receiver confirms the command.
ON
OFF
ON
Level 5
Figure 35 - Remote Control Display of
Flame Height Minimum and Maximum
22
OPERATION
Continued
LCD
Display
ON/OFF
THERMOSTAT
UP/ DOWN
Arrows
MODE
ON
Level 1
ON
MAX
MAXIMUM
www.SuperiorFireplaces.US.com
ROOM THERMOSTAT
The remote control can operate as a room
thermostat. The thermostat can be set to a
desired temperature to control the comfort
level in the room.
To activate, press THERMOSTAT button on re-
mote control (see Figure 36). The word ON will
appear to the right of temperature bulb graphic
on display (see Figure 36). Use UP/DOWN
arrow button to set desired room temperature.
Control system will cycle fireplace on or off to
maintain selected temperature.
ON
Figure 36 - Room Temperature Setting
SMART THERMOSTAT
The Smart Thermostat adjusts flame height
in accordance to differences between set
temperature and room temperature. As room
temperature gets closer to set temperature the
smart function will modulate the flame lower.
As room temperature cools, it will modulate
the flame higher.
To activate this function, press THERMOSTAT
button until the word SMART appears to the
right of temperature bulb graphic on display.
Use UP/DOWN arrow button to set desired
room temperature. The control system will
cycle the fireplace on or off to maintain se-
lected temperature.
SMART
MAX
Figure 37 - Smart Thermostat Setting
Room
Temperature
Set
Temperature
126861-01A