Jenn-Air JB36NXFXLW00 Technical Education page 67

REMOVING THE HEATED FLIPPER MULLION AND
AN ACTUATOR / ELECTRICAL CONTACT
To remove the top or bottom heated
4.
flipper mullion actuator/electrical con-
tact:
a) Open the refrigerator doors.
Top Mullion
Actuator/
Electrical Contact
Bottom Mullion
Actuator/
Electrical Contact
b) Use a flat-blade screwdriver, and un-
screw the cap from the actuator/elec-
trical housing.
c) Pry off the cover from the actuator/
electrical contact.
Screw Cap
Bottom Mullion
Actuator / Electrical Housing
42" FRENCH DOOR (continued)
Actuator / Electrical
Contact Cover
d) Remove the two hex-head screws from
the actuator/electrical contact.
Actuator / Electrical Contact Screws
e) Disconnect the spade connector from
the actuator/electrical contact terminal.
Actuator / Electrical Contact Terminal
4-21