Context Menu Options - Honeywell MAXPRO NVR XE Operator's Manual

M O N I T O R I N G A S I T E
4
Timeline
•
C
ONTEXT MENU OPTIONS
A context menu appears when you right-click on a panel displaying live video. The following
table lists the commands in the context menu.
56
Click the drop-down arrow on the
playing and select a time interval. Click the to jump backward
to jump forward. The video jumps to the selected time interval.
Sync video
Sync video allows you to synchronize the display of video from multiple cameras. In
the Salvo layout, select the cameras, select the Sync check box on the timeline
window or click on the tool bar above salvo layout to enable sync playback
mode. Any actions performed like jump, forward, and rewind is synced in the entire
salvo layout. When a new camera is dragged and dropped, the video from that
camera is also synched.
Command
Full Screen
Remove Text Overlay
Digital PTZ
Add Bookmark
Mark In
Mark Out
Save Image
Click to...
maximize the salvo layout to full screen.
Alternatively, you can click
toolbar on the top of the salvo layout.
to remove text overlay displayed on the
video.
Alternatively, you can click in the toolbar on
the top of the salvo layout.
enable digital PTZ. See Panning Tilting and
Zooming for information on digital PTZ. See
Panning, tilting, and zooming
add a bookmark in the timeline. You can also
add a bookmark by pressing the CTRL + B
keys.
add a mark in point in the timeline. You can
also add a mark in point by pressing the
CTRL + I keys.
See Video Recording and Viewing
53.
add a mark out point in the timeline. You can
also add a mark out point by pressing the
CTRL + O keys.
See Video Recording and Viewing
53.
save the frame displayed in the panel as an
image in the BMP format.
Alternatively, you can click
toolbar on the top of the salvo layout to save
the image in BMP format. See
on page 62.
MAXPRO NVR Operator's Guide
while video is
or click the
in the
on page 61.
on page
on page
in the
Saving images