Report Tab; Setting Preferences; Settings For Video Rendering - Honeywell MAXPRO NVR XE Operator's Manual

L O G G I N G O N A N D F A M I L I A R I Z A T I O N
2

Setting preferences

R
The following figure illustrates the Report tab.
Event History
Report
Operator Log Report
Report content
area
Displays the
content for the
selected report
S
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
The Preferences option in the User menu enables you to configure the general settings and
the On Screen Display (OSD) settings. In general settings, you can configure the frame rate for
panels that are not selected in the salvo layout, the video rendering settings, the video to be
displayed for alarms, and the alarm threshold settings. The OSD settings can be configured to
change the font properties like type, color, and size for the text that appears over the video
displayed in a panel.
You can also select the default values for the general and OSD settings using the Preferences
option.
S
There are two types of rendering modes, Default and No Video Display. The Default
rendering is the recommended mode which enables the user to view live video from multiple
cameras at optimum quality. Selecting No Video Display does not display any video. You can
also set the frame rate for panels that are not selected in the salvo layout. The frame rate for
the panels that are not selected can be set to improve the video signal transmission over lower
bandwidth networks.
To select the video rendering option
1.
2.
30
E P O R T T A B

Report tab

ETTING P R E FE R ENC ES
E T TI N G S F O R V I D E O R E N D E R I N G
Click the Preferences option in the user menu. The Preferences dialog box displays. By
default, the General Settings tab is selected.
Click the Rendering Settings tab.
Figure 2‐4 Report tab
MAXPRO NVR Operator's Guide