4.10.10 Standard Intonation; 4.10.11 Reverb - Johannus Opus S User Manual

4.10.10 Standard Intonation

The Standard Intonation function saves the desired standard intonation in
the memory.
1. Press the MENU button.
2. Use the - and + buttons to select the Std. Intonation function.
3. Press the SET button. The display shows the set intonation.
4. Use the - and + buttons to select an intonation (Romantic, Symphonic
or Baroque) that must be activated when the organ is switched on.
5. Press the SET button. The selected intonation is saved in the memory.
After this, the option Chorus On/Off appears on the display.
6. Use the - and + buttons to select if the Chorus (CH) accessory is
switched on or off when switching on the organ.
7. Press the SET button. The selected setting is saved in the memory and
you automatically return to the main menu.
8. Press the MENU button to exit the Easy Menu.

4.10.11 Reverb

The Reverb function sets the reverberation selection.
Programme the Reverberation
1. Press the MENU button.
2. Use the - and + buttons to select the Reverb function on the display.
3. Press the SET button. The display shows the selected intonation and
reverberation.
4. Use the ROM, SYM and BAR buttons to select an intonation.
5. Use the - and + buttons to select the desired reverberation.
6. Press the SET button. The selected reverberation is saved in the
memory and you will automatically return to the main menu.
7. Press the MENU button to exit the Easy Menu.
There are three reverberation options
Town Church
Hill Church
Marble Church
21