Install Range Hood; Complete Installation - KitchenAid 9760425A Installation Instructions And Use And Care Manual

3. Slide the chimney cover provided with the extension kit over
the lower chimney support and extension frame and secure to
the top of the extension frame using the two screws provided.
A
B
C
A
A. Screw
B. Upper chimney extension cover
C. Lower chimney cover
4. Slide lower chimney cover over the chimney support and
extension chimney cover and attach to the bottom of the
support using the two screws provided.
A. Chimney extension kit assembled to hood
assembly with chimney covers attached

Install Range Hood

1. Lift the hood up against the chimney support and attach to
the support with 4 bolts provided. Tighten bolts securely.
A
B
C
A. Chimney support
B. Hood
C. Bolts
10
A
2. From the underside of the hood, plug control cables together
as shown.
3. Insert each connected cable into a black plastic connector
box half.
4. Place the top half of the connector box on each and screw
the two halves together using the four screws provided for
each connector box.
A
B
B
A. Screws
B. Connector box half
5. Using the two longer screws provided for each box, attach
the assembled connector boxes to the metal flange.

Complete Installation

1. For recirculating installations only, install charcoal filter from
Recirculating Chimney Kit behind the center grease filter by
inserting and locking it in place.