Fingerprint Reader Assembly - HP EliteBook 830 G6 Maintenance And Service Manual

Fingerprint reader assembly

Table 6-13 Fingerprint reader assembly, bracket, gasket and cable descriptions and part numbers
Description
Fingerprint reader assembly (includes EMI gasket)
Fingerprint reader cable
Fingerprint reader bracket
Fingerprint reader insert (for use in models without a fingerprint reader)
Before removing the fingerprint reader assembly, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover (see
3. Remove the battery (see
4. Remove the system board (see
Remove the fingerprint reader assembly:
1. Remove the Phillips M2.0 × 3.0 screw (1) that secures the fingerprint reader bracket to the computer.
2. Lift the bracket from on top of the fingerprint reader assembly (2).
(Preparation for disassembly on page
Bottom cover on page
Battery on page 45).
System board on page
Spare part number
L60625-001
L60602-001 (Cable Kit)
L72085-001 (Cable Kit, privacy)
L65688-001
L60631-001 (Plastics Kit)
32).
32).
59).
Component replacement procedures 63