Icom IC-F3210D Operating Manual page 7

DIGITAL BUTTON
<For the IC-F3210D/F4210D series transceivers>
N/A
<For the IC-F3230D/F4230D/F5220D/F6220D series transceivers>
Push to enter the application selection mode*.
➥
Hold down for 1 second to toggle the call type between
➥
Individual and Talkgroup, and automatically enter the ap-
plication selection mode.
• Push [CH Up] or [CH Down] to select the desired application
from "VOICE," "CALLALRT," "STATUS" and "MSG."
While in the application selection mode, push to enter the
➥
Individual or Talkgroup ID selection mode*.
• Push [CH Up] or [CH Down] to select the desired ID name (or ID
code).
• If "STATUS" or "MSG" is selected as the application, push this
key to enter the message selection mode. After selecting a mes-
sage, push again to enter the destination ID selection mode. (pp.
20, 22)
Hold down for 1 second to return to the standby mode.
➥
* When the Digital/Individual/Talkgroup Key item is set to "ID Select"
in the optional cloning software, the ID selection mode will be se-
lected first. And while in the ID selection mode, push to select the
application selection mode.
STATUS UP, STATUS DOWN
<For the IC-F3210D/F4210D series transceivers>
N/A
<For the IC-F3230D/F4230D/F5220D/F6220D series transceivers>
When a received SDM (Short Data Message) is displayed,
➥
push to cancel the automatic scroll and manually scroll the
message.
When an SDM that contains more than 8 characters is dis-
➥
played, push to manually scroll the message.
In the standby mode, push to display the transmit status
➥
and select a status number.
POWER OFF EMERGENCY
<For the IC-F3210D/F4210D/F3230D/F4230D series transceivers>
N/A
<For the IC-F5220D/F6220D series transceivers>
While holding down this key, turn OFF the transceiver to acti-
vate the Power OFF Emergency function. This function makes
the transceiver transmit Emergency calls, even though it ap-
pears to be OFF. (p. 25)
When the function is activated, any key operation, hanger ac-
tion, Lone Worker function, LED and speaker are disabled.
However, the transceiver can transmit Emergency calls ac-
cording to the Emergency settings.
To cancel the function and restore the transceiver, turn ON
the transceiver's power.
1
PREPARATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
5