Icom IC-F5220D Insrtuction Manual
  1. Manuals
  2. Brands
  3. Icom Manuals
  4. Transceiver
  5. IC-F5220D
  6. Insrtuction manual
Icom IC-F5220D Insrtuction Manual

Icom IC-F5220D Insrtuction Manual

Vhf/uhf digital transceiver
Hide thumbs Also See for IC-F5220D:
Table of Contents

Advertisement

Quick Links

See also: Operating Manual
INSTRUCTION MANUAL
VHF DIGITAL TRANSCEIVER
iF5220D
UHF DIGITAL TRANSCEIVER
iF6220D

Advertisement

Table of Contents
loading

Related Manuals for Icom IC-F5220D

Summary of Contents for Icom IC-F5220D

  • Page 1 INSTRUCTION MANUAL VHF DIGITAL TRANSCEIVER iF5220D UHF DIGITAL TRANSCEIVER iF6220D...

  • Page 2: Important

    FCC Rules. These limits are designed to provide reasonable instruction manual contains important oper ating instructions protection against harmful interference when the equipment for the IC-F5220D VHF DIGITAL TRANSCEIVER and the IC- is operated in a commercial environment. This equipment F6220D UHF DIGITAL TRANSCEIVER.

  • Page 3: Precautions

    Other microphones Icom, Icom Inc. and the Icom logo are registered trademarks of Icom have different pin assignments and may damage the trans- Incorporated (Japan) in Japan, the United States, the United King- ceiver.

  • Page 4: Table Of Contents

    VOICE CODING TECHNOLOGY TABLE OF CONTENTS IMPORTANT ................i The AMBE+2™ voice coding Technology embodied in this EXPLICIT DEFINITIONS ............i product is protected by intellectual property rights including FCC INFORMATION ............. i patent rights, copyrights and trade secrets of Digital Voice Sys- PRECAUTIONS ..............

  • Page 5: Panel Description

    PANEL DESCRIPTION Front panel ■ Function display (p. 2) Speaker q AF VOLUME CONTROL KNOB [VOL] r DEALER-PROGRAMMABLE KEYS Rotate the knob to adjust the audio output level. Required functions can be independently programmed by • Minimum audio level is preprogrammed. (p. 8) your dealer.

  • Page 6: Function Display

    PANEL DESCRIPTION Function display ■ r LOW POWER ICON y u i Appears when low output power is selected. t AUDIBLE ICON In the analog mode, appears when the CTCSS (DTCS) ➥ squelch mute is released while holding down [Monitor]. In the digital mode, appears while holding down [Moni- ➥...

  • Page 7: Programmable Function Keys

    ➥ • When a scan is started with the Power ON Scan or Automatic Consult your Icom dealer or system operator for details con- scan function, push this key to cancel it. The cancelled scan re- cerning your transceivers programming.
  • Page 8 PANEL DESCRIPTION Programmable function keys (Continued) ■ PRIORITY A CHANNEL, PRIORITY B CHANNEL LOCK Push to select the Priority A or Priority B channel. Hold down this key until “LOCK ON” is displayed to elec- ➥ tronically lock all programmable keys except the following: PRIORITY A CHANNEL (REWRITE), [Moni], [Lock], [Emergency]*, [Power OFF Emergency]*, PRIORITY B CHANNEL (REWRITE)
  • Page 9 PANEL DESCRIPTION HOOK SCAN ANNOUNCE When the Hook Scan function is preprogrammed, push this Push to turn the Channel Announce function ON or OFF. key to temporarily disable the function. Push this key again to When this function is turned ON, the transceiver announces enable the function.

  • Page 10: Basic Operation

    BASIC OPERATION Turning ON the power Channel selection ■ ■ Push [ ] to turn ON the power. There are several ways to select channels, and they may dif- If the transceiver is programmed for a start up password, fer, depending on your system set up. input the digit codes that were set by your dealer.

  • Page 11: Receiving And Transmitting

    BASIC OPERATION Receiving and transmitting ■ Transmitting notes Receiving: Hold down [ ] for 1 second to turn ON the power. • Transmit inhibit function Push [CH Up] or [CH Down] to select a channel. The transceiver has several inhibit functions which restrict When receiving a call, rotate [VOL] to adjust the audio out- transmission under the following conditions: put level to a comfortable listening level.

  • Page 12: User Set Mode

    BASIC OPERATION User Set mode Priority A channel selection ■ ■ The User Set mode allows you to set seldom-changed set- When one of the following operations is performed, the trans- tings. If the transceiver has [User Set Mode] assigned to it, ceiver automatically selects the Priority A channel.

  • Page 13: Connection And Maintenance

    CONNECTION AND MAINTENANCE Rear panel connection ■ q ANTENNA CONNECTOR e MICROPHONE HANGER Antenna Connect to an antenna. Ask your Connect the supplied micro- dealer about antenna selection phone hanger to the vehicle’s ground for microphone ON/OFF and placement. hook functions. (See page 1) w EXTERNAL SPEAKER JACK Connect to a 4 to 8 ø...

  • Page 14: Supplied Accessories

    CONNECTION AND MAINTENANCE Supplied Accessories ■ Microphone Microphone Microphone hanger Microphone and screw set hanger cable The supplied or optional microphone has a PTT switch and a hanger hook. • The following functions are available when the microphone is ON or OFF hook (depending on the preprogramming): - Automatic scan starts when you put it ON hook.

  • Page 15: Mounting The Transceiver

    CONNECTION AND MAINTENANCE Mounting the transceiver Antenna ■ ■ The universal mounting bracket supplied with your transceiv- A key element in the performance of any communication sys- er allows overhead mounting. tems is its antenna. Contact your dealer for more information •...

  • Page 16: Cleaning

    Approved Icom optional equipment is designed for optimal performance when used with an Icom transceiver. Icom is not responsible for the destruction or damage to an Icom transceiver in the event the Icom transceiver is used with equipment that is not manufactured or approved by Icom.

  • Page 17: Safety Training Information

    SAFETY TRAINING INFORMATION 3. IC-F5220D: Your Icom radio generates RF electromagnetic en- Transmit only when people outside the vehicle are at least the rec- ergy during transmit mode. This radio is designed ommended minimum distance of 100 centimeters away from the for and classified as “Occupational Use Only”,...
  • Page 18 LCD. You can cause the radio to transmit by pressing the “PTT” switch. Electromagnetic Interference/Compatibility During transmissions, your Icom radio generates RF energy that can possibly cause interference with other devices or systems. To avoid such interference, turn OFF the radio in areas where signs are posted to do so.
  • Page 19 SAFETY TRAINING INFORMATION Votre radio Icom produit une énergie électro- 3. IC-F5220D: magnétique de radiofréquences (RF), en mode Émettre uniquement lorsque les personnes à l’extérieur du véhi- de transmission. Cette radio est conçue pour cule se trouvent à au moins la distance minimale recommandée un «usage professionnel seulement»...

  • Page 20: Safety Training Information

    émettra si vous appuyez sur le bouton du microphone. Interférence électromagnétique et compatibilité En mode de transmission, votre radio Icom produit de l'énergie de RF qui peut provoquer des interférences avec d'autres appareils ou systèmes. Pour éviter de telles interférences, mettez la radio hors tension dans les secteurs où...
  • Page 21 MEMO...
  • Page 22 MEMO...
  • Page 23 MEMO...
  • Page 24 A-7079H-1EX-w Printed in Japan © 2013 Icom Inc. 1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003, Japan Printed on recycled paper with soy ink.

This manual is also suitable for:

Ic-f6220d

Table of Contents