Connecting Via A Wired Lan; Connecting Via A Usb Cable; Connecting Via A Wireless Lan (Mf229Dw/Mf227Dw Only) - Canon imageclass MF229DW Quick Start Manual

Connecting via a Wired LAN

Checking Before the Setup
Internet
Are the computer and the router (or hub) properly
connected using a LAN cable?
For more information, see the instruction manual for the
network device you are using, or contact the networking
device manufacturer.
Have the network settings on the computer been
completed?
If the computer is not properly confi gured, you may not use
the wired LAN connection even after completing the following
settings.
NOTE
• You cannot connect both the wired LAN and wireless
LAN at the same time. In addition, the machine is set to
the "Wired LAN" by default.
• When you connect to a network environment that is not
security protected, your personal information could be
disclosed to third parties. Please use caution.
• If you connect through a LAN in the offi ce, contact your
network administrator.
Connecting via a Wired LAN
1
Connect the LAN cable.
En
The IP address will be automatically confi gured in 2
minutes. If you want to set the IP address manually, see
the following items.
e-Manual "Network" ▶ "Connecting to a Network" ▶
"Setting IP Addresses"
2
Install the driver and software using the User
Software and Manuals DVD-ROM.
See "For details on the installation procedures:" (P.13).
Proceed to "Setting a Paper Size and Type" (P.13).
10
Router
or
hub
LAN cable

Connecting via a USB Cable

Connect the USB cable after installing the MF Drivers and the
MF Toolbox.
NOTE
• If you connected the USB cable before installing the MF
drivers, refer to the MF Driver Installation Guide.
1
Install the driver and software using the User
Software and Manuals DVD-ROM.
See "For details on the installation procedures:" (P.13).
2
Connect the USB cable.
Proceed to "Setting a Paper Size and Type" (P.13).
Connecting via a Wireless LAN
(MF229dw/MF227dw Only)
Checking Before the Setup
Internet
Is the computer connected to the router (access point)
correctly by a LAN cable or wireless LAN?
For more information, see the instruction manual for the
network device you are using, or contact the networking
device manufacturer.
Have the network settings on the computer been
completed?
If the computer is not properly confi gured, you may not
use the wireless LAN connection even after completing the
following settings.
Wireless LAN Router