What's In The Packaging - JBL Intellivox-DC115 Installation Manual

A standard option applicable to all models is the position
within the housing of the electronics module, which may
either be at the top or bottom of the housing. The position
is relevant to the installation procedure as the "acoustic
centre" (see fig 2) of the loudspeaker array will be different
in the two cases. It is not possible for the electronics
module's position to be changed after production.
A further option available to special order is for the
electronics module to be mounted at the rear of the unit.
This results in a loudspeaker with different dimensions from
the standard models, requiring a different mounting
procedure. Note that this manual is NOT applicable to these
versions; please contact JBL for more information.

WHAT'S IN THE PACKAGING

In addition to the loudspeaker itself, each unit is shipped
with the following items:
• Installation manual (this document)
• Datasheet specific to the model
• Box containing:
REF
A
B Set of 30 mm hex-head screws with washers and wall plugs
C
D 6-pole female WAGO connector, with cover
E 5-pole female WAGO connector, with cover
F, G Set of PVC inserts for WAGO connectors, with wire insertion tool
H Set of M4 x 10 round-head screws with star retaining washers
I M5 x 12 pan-head screws with shakeproof washers
J
* depending on model
The mounting brackets, screws and wall plugs as well as the connector set are packed together in a
separate box enclosed in the main packaging.
6
ITEM
Mounting brackets
Female IEC mains connector
Caution Label
DC115
amp at bottom
E
B
fig.3 - Box contents
G
QTY
2 or 3*
4 or 6*
1
1
1
1
4 or 8*
8 or 12*
1
JBL Intellivox Installation Manual
fig.2
Reference point for
acoustical mounting
height
Reference point for
acoustical mounting
height
DC115
amp at top
A
C
F
I
USE
Speaker mounting
Mounting bracket fixings
(wall)
AC input
Mating connector
for audio
Mating connector for
RS-485 control port
WAGO connector wiring
Grille retaining screws
Mounting bracket fixings
(loudspeaker)
Mains cable labeling
201401/IvxIM_v2.2
D
H
J