Ac Mains - JBL Intellivox-DC115 Installation Manual

JBL Intellivox Installation Manual
fig.5.2 - Additional access to connector block via
the front cover plate
Additional access to the connectors is available via the
connector plate located between the amplifier and
loudspeaker baffle. Removal of the front grille will be
necessary to gain access.

AC MAINS

The Intellivox is equipped with a 3-pin IEC
mains connector with an integral fuse holder.
Only ever replace the fuse with one of the same type and
rating. Never attempt to replace a fuse without first
removing the IEC plug from the unit. Be sure that the mains
voltage stated on the unit complies with the local standard
before connecting the Intellivox to the mains supply. Be sure
to use the appropriate cable diameter for the power
consumption of your particular Intellivox model.
201401/IvxIM_v2.2
A pre-made IEC mains cable (with the appropriate plug for
the territory) may be used if one of a suitable length is
available. Otherwise, use the mating IEC cable socket
supplied, and wire to the intended mains outlet. Note that
this connector is only suitable for use with stranded
"appliance" cable, not rigid mains installation cable.
N
L
fig.6.1 - IEC mains cable wiring
TERM EURO
L Brown
E Green/yellow
N Blue
A stranded wire clamp is available from JBL to make the
transition from rigid mains installation wiring to stranded
appliance cable, should no suitable mains outlet or
connection plate be available. Refer to page 22 for ordering
information.
Warning – This apparatus is a Class I device
and must be connected to a mains socket
outlet that provides a safety ground connection.
fig.6.2 IEC mains cable label
Warning – The caution label contained in the
Intellivox standard connector set must be
placed in close proximity to the IEC female
cable plug as indicated in fig.6.2.
USA
Black
Green
White
9