Mercedes-Benz C-Class Coupe Operator's Manual page 112

Hide thumbs Also See for C-Class Coupe:
Table of Contents

Advertisement

Exterior lighting
110
with the parking lamps and low-beam head-
lamps.
To switch on the front fog lamps: turn
X
the SmartKey in the ignition lock to position
2 or start the engine.
Turn the light switch to L or Ã.
X
Press the N button.
X
The green N indicator lamp in the instru-
ment cluster lights up.
To switch off the front fog lamps: press
X
the N button.
The green N indicator lamp in the instru-
ment cluster goes out.
Only vehicles with front fog lamps have the
fog lamps function.
Rear fog lamp
The rear fog lamp improves visibility of your
vehicle for the traffic behind in the event of
thick fog. Please take note of the country-
specific regulations for the use of rear fog
lamps.
To switch on the rear fog lamps: turn the
X
SmartKey in the ignition lock to position 2
or start the engine.
Turn the light switch to L or Ã.
X
Press the R button.
X
The yellow R indicator lamp in the
instrument cluster lights up.
To switch off the rear fog lamp: press the
X
R button.
The yellow R indicator lamp in the
instrument cluster goes out.
Parking lamps
! If the battery has been excessively dis-
charged, the parking lamps or standing
lamps are automatically switched off to
enable the next engine start. Always park
your vehicle safely and sufficiently lit
according to legal standards. Avoid the
continuous use of the T parking lamps
for several hours. If possible, switch on the
X right or the W left standing lamp.
To switch on: turn the light switch to T.
X
The green indicator lamp in the instrument
cluster lights up.
Standing lamps
Switching on the standing lamps ensures the
corresponding side of the vehicle is illumina-
ted.
To switch on the standing lamps: the
X
SmartKey is not in the ignition lock or it is in
position 0.
Turn the light switch to W (left-hand side
X
of the vehicle) or X (right-hand side of
the vehicle).
Combination switch
Turn signal
High-beam headlamps
:
Turn signal, right
;
High-beam flasher
=
Turn signal, left
?
To indicate briefly: press the combination
X
switch briefly to the pressure point in the
direction of arrow ; or ?.
The corresponding turn signal flashes three
times.
To indicate: press the combination switch
X
beyond the pressure point in the direction
of arrow ; or ?.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents