Mercedes-Benz C-Class Coupe Operator's Manual page 106

Mirrors
104
Exterior mirror pushed out of position
If an exterior mirror has been pushed out of
position, proceed as follows:
Vehicles without electrically folding
X
exterior mirrors: move the exterior mirror
into the correct position manually.
Vehicles with electrically folding exte-
X
2
rior mirrors
ing button until you hear a click followed by
an impact sound. (
The mirror housing is engaged again and
you can adjust the exterior mirrors as usual
( page 102).
Y
Automatic anti-glare mirrors
G WARNING
Electrolyte may escape if the glass in an auto-
matic anti-glare mirror breaks. The electrolyte
is harmful and causes irritation. It must not
come into contact with your skin, eyes, res-
piratory organs or clothing or be swallowed.
There is a risk of injury.
If you come into contact with the electrolyte,
observe the following:
Rinse off the electrolyte from your skin
R
immediately with water.
Immediately rinse the electrolyte out of
R
your eyes thoroughly with clean water.
If the electrolyte is swallowed, immediately
R
rinse your mouth out thoroughly. Do not
induce vomiting.
If electrolyte comes into contact with your
R
skin or hair or is swallowed, seek medical
attention immediately.
Immediately change out of clothing which
R
has come into contact with electrolyte.
If an allergic reaction occurs, seek medical
R
attention immediately.
Only for Canada.
2
: press and hold mirror-fold-
page 103)
Y
The rear-view mirror and the exterior mirror
on the driver's side automatically go into anti-
glare mode if the following conditions are met
simultaneously:
the ignition is switched on and
R
incident light from headlamps strikes the
R
sensor in the rear-view mirror.
The mirrors do not go into anti-glare mode if
reverse gear is engaged.
Parking position for the exterior mir-
ror on the front-passenger side
Setting and storing the parking position
Using reverse gear
You can position the front-passenger side
exterior mirror in such a way that you can see
the rear wheel on that side as soon as you
engage reverse gear. You can store this posi-
tion.
Make sure that the vehicle is stationary and
X
that the SmartKey is in position 2 in the
ignition lock ( page 133).
Y
Press button ; for the exterior mirror on
X
the front-passenger side.
Engage reverse gear.
X
The exterior mirror on the front-passenger
side moves to the preset parking position.
Use adjustment button = to adjust the
X
exterior mirror to a position that allows you
to see the rear wheel and the curb.
The parking position is stored.