Table of Contents
Advertisement
Operation
The menu operations set configurations for the Nexus™ 4x4, including built-in programs to
Menu
operate the Nexus™ 4x4 without a DMX controller. The menu operations are accessed via the
Operations
control panel. See
Control
Panel.
Changes to settings are not activated until the control panel display returns to the
home screen. To return the control panel display to the home screen, press and hold
<MENU> for 10 seconds.
Auto Show mode allows for dynamic RGB color mixing without a DMX controller. To activate
Auto Show
Auto Show mode do the following:
1. Go to the Auto Show main level.
2. Select the Auto (1–12) or Fade program.
3. Select the Show Speed (000–100).
4. Press <MENU> to return to the home screen.
Auto Show mode does not stop when a different operating mode, such as DMX, Art-Net™, or
Exiting Auto Show
Kling-Net is selected. To exit from Show mode, put the Nexus™ 4x4 into Slave mode. For
Mode
more information see
Master/Slave
Mode. Slave mode does stop when a different operating
mode is selected through the control panel.
Static mode selects preset colors or color mixing. To set Static mode do the following:
Static Color
1. Go to the Static main level.
2. Select Fixture Color or Manual Color.
For Fixture Color:
1. Select desired color (R, G, B, GB, RB, RG, or RGB).
2. Press <MENU> to return to the home screen.
For Manual Color:
1. Select the desired color (R, G, or B).
2. Select the desired color value (000–255).
3. Repeat the steps for each color.
4. Press <MENU> to return to the home screen.
Dimmer Mode
Dimmer Mode configures the rate of change in light intensity. There are 3 different dimmer
modes with 1 being the slowest and 3 being the fastest. When Dimmer Mode is set to OFF,
the Nexus™ 4x4 fades in direct proportion to the DMX values. To configure Dimmer Mode, do
the following: Go to Dimmer Mode in the main level.
1. Select a dimmer mode (OFF, Dimmer 1, Dimmer 2, or Dimmer 3).
2. Press <MENU> to return to the home screen.
Display
Back Lite option determines how long the control panel display stays on during inactivity. To
set the display backlight time, do the following:
Backlight
1. Go to Back Lite in the main level.
2. Select the desired amount of time (in seconds) the backlight display will stay on after
pressing the last menu button (On, 10S, 20S, or 30S).
3. Press <MENU> to return to the home screen.
Nexus™ 4x4 User Manual Rev. 4
-17-
Advertisement
Table of Contents
