Welcome; Tr-069 Protocol Support; Phones - Aastra 6700i Series Configuration Manual

Welcome

This document provides information about Technical Report (TR)-069 protocol support for the 9000i Series SIP IP Phones
(9143i, 9480i), the 6700i Series SIP IP Phones (6730i, 6731i, 6735i, 6737i, 6739i, 6753i, 6755i, 6757i), and the 6800i Series SIP
IP Phones (6863i, 6865i, and 6867i)

TR-069 Protocol Support

The IP Phones support the TR-069 protocol. This protocol is a bi-directional HTTP-based protocol that provides a means of
communication between Customer-Premises Equipment (CPE) (e.g. IP phones) and Auto Configuration Servers (ACSs)
over DSL/broadband connections. It includes both safe auto configuration and the control of other CPE management
functions within an integrated framework.
Note:
Implementation of the TR-069 protocol follows TR-104 and TR-106 standards to the extent of data sets applicable to SIP
IP phones.
Service providers can, through TR-069, use one common platform to manage (through the internet) all of their customer
premise devices, regardless of the device or manufacturer. If TR-069 is enabled on the phones, when the remote ACS
boots the phones, they contact the ACS and establish the configuration automatically.
In addition to configuring the phone with TR-069, you can also do the following:
• Reboot the phone
• Reset to factory defaults
• Update the firmware of the device
• Backup/restore configuration
• Upload the log file
An Administrator can configure the TR-069 parameters using the configuration files only. For more information about the
TR-069 parameters, see
Pre-Staging SIP Phones
There are two options available to enable TR-069 support for the phones:
a) An Administrator can provide a configuration file (that can be taken from the TFTP site or during RCS provisioning)
with parameters that are specified in
The phones can be branded and the branded default configuration file can contain all the necessary parameters
b)
After phones (with correct firmware) receive this configuration file, they will start a bootstrap procedure and connect to
the ACS server.
41-001373-01 REV02 – 05.2014
"TR-069 Parameter Descriptions"
"TR-069 Parameter Descriptions"
on page 3.
on page 3.
.
1