Active and Passive notification is currently supported for the following parameters:
•
Global parameters:
–
sip user name
–
sip proxy ip
–
sip proxy port
–
sip registrar ip
–
sip registrar port
–
sip auth name
–
sip password
–
sip stun ip
–
sip stun port
–
dhcp
–
ip
•
Parameters for Line 0 to 9 (where N is the line number):
–
sip lineN user name
–
sip lineN proxy ip
–
sip lineN proxy port
–
sip lineN registrar ip
–
sip lineN registrar port
–
sip lineN auth name
–
sip lineN password
Secured Connection Support
The following parameters have been introduced in Release 3.3.1 allowing Administrators the ability configure a secure
connection between the CPE and ACS:
•
tr69 trusted certificates
•
tr69 private key
•
tr69 server authentication required
Each of these parameters are described as follows:
Parameter –
tr69 trusted certificates
Description
Format
Default Value
Range
Example
41-001373-01 REV02 – 05.2014
Configuration Files
aastra.cfg, mac.cfg
Specifies a file name for a .PEM file located on the configuration server.
This file contains the User-provided certificates in PEM format. These cer-
tificates are used to validate peer certificates.
Note:
The parameter "tr69 server authentication required" must be enabled in
order for the phone to do a Client-authenticated TLS handshake.
Alphanumeric String
Empty
Not Applicable
tr69 trusted certificates: ftp://admin:admin!@1.2.3.4:50/path/tr69CA.pem
Note:
In the above example, "path" represents the directory and "tr69CA.pem"
represents the filename.
TR-069 Protocol Support
9