Factory Reset; Device Data Model Support; Oui And Product Class - Aastra 6700i Series Configuration Manual

TR-069 Protocol Support

Factory Reset

The purpose of a factory reset is to restore the configuration to default when it is requested by the ACS server. From the
ACS server, make a "factory reset" request. This will set all the parameters to the default value.
Note:
A factory reset will result in the phone clearing out all configured parameters, including the TR-069 configured settings.

Device Data Model Support

For this release, the phones support only the configuration parameters listed in the section,
port" on page 2, for remote management through the TR-069 Protocol. Some ACS's (e.g. a specific home management
device) requires a vendor-specific device data model in XML format before the IP phones can connect to it. See
dix B - XML Data Model" on page B-1
As defined in this data structure, some parameters have write privileges and can be changed remotely (e.g. DNSServer).
However, you may have to reboot the phone in order for the change to take effect.

OUI and Product Class

The above data structure is common across all the TR-069 supported Aastra SIP phones. The table below summarizes the
supported phones and their corresponding OUI and Product Class.
Supported Aastra Models
6730i
6731i
6735i
6737i
6739i
6753i
6755i
6757i
6863i
6865i
6867i
9143i
9480i
12
for an example of an XML data model.
OUI
00085D
00085D
00085D
00085D
00085D
00085D
00085D
00085D
00085D
00085D
00085D
00085D
00085D
"TR-069 Functionality Sup-
Product Class
6730i
6731i
6735i
6737i
6739i
6753i
6755i
6757i
6863i
6865i
6867i
9143i
9480i
41-001373-01 REV02 – 05.2014
"Appen-