Using The Leds And E-Buzzer To Troubleshoot Your System - HP Server rx2600 Installation Manual

Troubleshooting Your System

Using the LEDs and e-buzzer to Troubleshoot Your System

Figure 2-1
Locator Button/LED
48
Using the LEDs and e-buzzer to Troubleshoot
Your System
There is a set of four LEDs located on the desk-side and rack-mount
system's front panel that are used for diagnosing the health of the
system. These LEDs warn of any impending failures and allow you to
take preventive action. For example, you may want to make a system
backup or replace a system component before it quits functioning. The
other four LEDs are the Power, System, LAN, and Locator LEDs. This
section explains how the system's LEDs can be used for troubleshooting
system problems and how to locate the system you want to work on
within a rack of systems.
Rack-mounted System's LEDs and Buttons
e-buzzer
Icon (hold
phone
here)
System
Information
Card
Diagnostic LEDs
LAN LED
System LED
Power
On/Off
LED
Power
Button
Chapter 2