Amana ACE208 Service Manual page 12

Display and Features (cont'd)
PREHEAT
TIME
ON / OFF
Start Pad
START
The start pad is used
to begin a manual
time entry cooking
cycle.
STOP
STOP/RESET
RESET
pad
The STOP/RESET
pad stops a cooking sequence in
progress, clears out any
remaining time, and also ends a
programming or user option cycle.
When the STOP/RESET pad is
used to end a programming or
option change, the changes are
discarded.
Temperature warnings
The combination oven has two
distinct temperature warnings:
• A warning when the preheat
temperature does not match the
preprogrammed temperature of a
cooking condition.
• A warning when the actual oven
cavity temperature is not to
preheat temperature, such as
when the oven is first started.
RS2220002 Rev. 0
POWER
TEMP STAGE
LEVEL
Cooking Display
DISPLAYS
PREHEAT
READY
00:00
PREHEAT
NOT READY
COOK LEVEL
ITEM
STG
STANDBY
C M
C M
POWER
Programming Display
DISPLAYS
Prog
OP: --
STG
PROGRAM
SAVE
DESCRIPTION
PREHEAT READY displays when oven has
reached preheat temperature and is ready to cook.
Displays cooking time. If stage cooking is
programmed, total cooking time is displayed.
PREHEAT NOT READY displays and NOT
flashes when oven is turned on and is warming up
to the selected preheat temperature.
COOK LEVEL displays the current microwave
power level. HI is the highest setting, and 0 is lowest
(no microwave energy used).
ITEM displays the single or double digit entry of a
programmed cooking condition when using a
programmed pad. ITEM also flashes when a
cooking condition can be started or programmed.
STG displays with a single number. This is the
stage the oven is at in the cooking condition.
STANDBY displays when oven is turned off, and
also after the oven is plugged in, the door is
opened, and then shut.
C M
displays when oven is convection cooking.
C M displays when oven is cooking using both
microwave energy and convection.
POWER displays during active microwave
generation in the oven. POWER will not display when
power setting is at 0; and POWER will turn on and off
when microwave energy is set at less than HI.
DESCRIPTION
Displays when oven is in programming mode for
single pad or double pad memory.
Displays when oven is in user option mode. User
options can then be set or specified.
Displays stage number during cooking or when
programming a specific cooking stage. Stage
number (1 through 4) indicates the stage that is
being used.
12
PREHEAT NOT READY