Driving Position Memory System (Dpms) (If Equipped); Rearview Camera (If Equipped); Reverse Tilt Door Mirrors (If Equipped) - Honda 2011 Accord Crostour Technology Reference Manual

DRIVING POSITION MEMORY SYSTEM (DPMS) (if equipped)

Store a driver's seat and mirror position into memory for each remote transmitter.
Programming DPMS
1. Turn the vehicle on. Shift into
Park (P).
2. Adjust your preferred seat and
outside mirror settings.
Note: A stored memory position is linked to the corresponding keyless remote (1 or 2).
Each item begins to adjust when you unlock the driver's door with the remote and enter
the vehicle.
8
3. Press and hold the SET button
until you hear a beep, then release.
4. Press and hold the memory
button # corresponding to the
remote (1 or 2) you are using
until you hear two beeps.
REARVIEW CAMERA
For added convenience, the area behind your vehicle is displayed to help you navigate
while backing up.
How It Works
• When you shift into Reverse (R), a real-time image
of the area behind your vehicle is shown in the
navigation display, along with helpful parking guide
lines.
• Turn the guide lines off by pressing and holding
CANCEL for about 3 seconds.
• The display turns off when you shift out of Reverse.
REVERSE TILT DOOR MIRRORS
When you shift into Reverse (R), you can tilt either outside door mirror down slightly
to improve your view as you parallel park. Shifting out of Reverse returns the tilted
mirror to its original position.
How It Works
• To tilt the driver's door
mirror, move the
mirror selector switch
to the left (L) position.
• To tilt the passenger's
side door mirror, move
the mirror selector
switch to the right (R)
position.
• To turn the feature off,
move the switch to the
middle position.
(models with navigation)
9