Driving Position Memory System (Dpms) (If Equipped); Rearview Camera (If Equipped) - Honda ACCORD CROSSTOUR 2010 Technology Reference Manual

DRIVING POSITION MEMORY SYSTEM (DPMS) (if equipped)

Store a driver's seat and mirror position into memory for each remote transmitter.
Programming DPMS
1. Turn the vehicle on. Shift into
Park (P).
2. Adjust your preferred seat and
outside mirror settings.
Note: Each group of settings is activated by the corresponding remote transmitter
(1 or 2) when it's used to unlock the driver's door. When activated, each item begins
to adjust before you enter the vehicle.
8
3. Press and hold the SET button
until you hear a beep, then release.
4. Press and hold the memory
button # corresponding to the
remote (1 or 2) you are using
until you hear two beeps.
REARVIEW CAMERA
For added convenience, the area behind your vehicle is displayed to help you navigate
while backing up.
How It Works
• When you shift into Reverse, a real-time image of
the area behind your vehicle is shown in the
navigation display, along with helpful parking guide
lines.
• Turn the guide lines off by pressing and holding
CANCEL for about 3 seconds.
• The display turns off when you shift out of Reverse.
IPOD ® OR USB FLASH MEMORY
Plays audio files from your compatible iPod or USB flash memory device through your
vehicle's audio system.
Connecting Devices and Playing Audio Files
1. Open the center console, and pull
out the USB adapter cable.
2. Connect the USB connector to your
iPod dock connector or flash drive.
iPod is a registered trademark of Apple Computer, Inc.,
registered in the U.S. and other countries. iPod not included.
(models with navigation)
3. Press CD/AUX or AUX to begin
playing.
9