Table of Contents
Advertisement
DRIVING POSITION MEMORY SYSTEM (DPMS) (if equipped)
Store a driver's seat position into memory for each remote transmitter.
Programming DPMS
1. Turn the ignition switch to
ON (II). Shift into Park (P).
2. Adjust your seat to the preferred
setting.
Note: A stored memory position is linked to the corresponding keyless remote (1 or 2).
Each item begins to adjust when you unlock the driver's door with the remote and enter
the vehicle.
8
3. Press the SET button. You will
hear a beep.
4. Press the memory button
corresponding to the remote
(1 or 2) you are using. You will
hear two beeps.
REARVIEW CAMERA
For added convenience, the area behind your vehicle is displayed to help you navigate
while backing up.
How It Works
• When you shift into Reverse (R), a real-time image
of the area behind your vehicle is shown in the
navigation display, along with helpful parking guide
lines.
• Turn the guide lines off by pressing and holding
CANCEL for about 3 seconds.
• The display turns off when you shift out of Reverse.
iPod
OR USB FLASH DRIVE
®
Play audio files from your compatible iPod or USB flash drive through your vehicle's
audio system.
Connecting Devices and Playing Audio Files
1. Open the center console, and pull
out the USB adapter cable.
2. Connect the USB connector to your
iPod dock connector or flash drive.
iPod is a registered trademark of Apple Computer, Inc., registered in the U.S. and other countries. iPod not included.
(models with navigation)
3. Press CD/AUX or AUX to begin
playing.
4. Press the SKIP buttons to change
tracks.
9
Advertisement
Table of Contents
